Hearing Brake Noise?

Your brakes are vital to making sure you stay safe on Los Banos roads. They provide you with sufficient stopping power on all of your adventures. Getting regular brake replacement and brake services ensures that your new or pre-owned vehicle continues to stop smoothly everywhere you go.

Getting certified Chevy brakes from Smith Chevrolet Of Turlock is a great way to guarantee you're getting nothing but high-quality parts and friendly customer service. Whether you'd like to opt for ACDelco Gold (Professional) or GM Genuine Parts brakes, we've got you covered.

Brake Specials

Brake Pad Rebate

$40 rebate* on the purchase and installation of front and rear GM Genuine Parts Brake Pads OR $20 on front and rear ACDelco Brake Pads

View Disclaimer

Brake Rotor Rebate

$40 rebate* on the purchase and installation of four GM Genuine Parts or ACDelco Brake Rotors

View Disclaimer

Most ACDelco Silver (ACDelco Advantage) Front Brake Pads Installed

12 Months/Unlimited Mile Warranty**

$144.00*

View Disclaimer

Most ACDelco Gold (ACDelco Professional) Front Brake Pads Installed

24 Months/Unlimited Mile Warranty**

$164.00*

View Disclaimer

Most GM Genuine Parts (ACDelco GM Original Equipment) Front Brake Pads Installed

24 Months/Unlimited Mile Warranty**

$250.00*

View Disclaimer

ACDelco Silver (ACDelco Advantage) Front Brake Rotors

Installed on most cars & small SUVs

$250.00*
12 Months/Unlimited Mile Warranty**

View Disclaimer

ACDelco Gold (ACDelco Professional) Front Brake Rotors

Installed on most cars & small SUVs

$298.00*
24 Months/Unlimited Mile Warranty**

View Disclaimer

GM Genuine Parts (ACDelco GM Original Equipment) Front Brake Rotors

Installed on most cars & small SUVs

$348.00*
24 Months/Unlimited Mile Warranty**

View Disclaimer

ACDelco Silver (ACDelco Advantage) Front Brake Rotors

Installed on most trucks and full-size SUVs

$250.00*
12 Months/Unlimited Mile Warranty**

View Disclaimer

ACDelco Gold (ACDelco Professional) Front Brake Rotors

Installed on most trucks and full-size SUVs

$298.00*
24 Months/Unlimited Mile Warranty**

View Disclaimer

GM Genuine Parts (ACDelco GM Original Equipment) Front Brake Rotors

Installed on most trucks and full-size SUVs

$348.00*
24 Months/Unlimited Mile Warranty**

View Disclaimer

Determining the Time for Brake Replacement or Repair

There are certain things to look out for or take note of before you go out on your Modesto adventures. When you keep up with brake replacements, you'll be able to drive around town without any worries that you won't have stopping power. Good indicators that your brakes will need replacement are as follows:

  • Squealing noises
  • Chirping sounds
  • Grinding noises
  • Brake pedal vibrations

If you notice any of the above events occurring, we recommend you schedule a service appointment to get brake services.

Chevy Brake Pad Warning Indicator

Aside from the usual warning signs that you need to get a brake service, Chevy brake pads often come equipped with a small, thin piece of metal attached to them. They will act as a warning indicator and make high-pitched sounds when braking. This will notify you when your brake pads need to be replaced.

You're always welcome to come into our service department if you prefer to have our team do the work for you. However, if you're more of a DIY kind of person and prefer to change your brake pads yourself in your Ceres driveway, we can still help. Our parts team is ready to find you the exact brake parts for your vehicle so that you can tackle a successful project. 

Are your brakes signaling a problem?

As we've mentioned, there are some common indicators that'll let you know it's time for a brake service. Everything from whistling noises to chirping sounds could be a few good indicators that brake services may be required. Staying up to date with brake maintenance will not only keep you and others on Turlock streets safe, but it'll also help prevent your ride from being damaged. Some other signs to watch out for could include:

  • Shaking steering wheels
  • Soft brake pedals
  • Unusual smells at the wheel area
  • Excessive brake dust on wheels

If you have any questions about your brakes or other concerns, please don't hesitate to contact us online or stop in at Smith Chevrolet Of Turlock for further assistance. We look forward to meeting you!

Brake service FAQ

How do I know when I need new brakes?
GM Brake pads are equipped with wear indicators that produce a squealing noise when the brakes are almost worn out. The noise may be present with or without the brake pedal applied, but when noise is heard from the wear indicator, the brake pads should be replaced as soon as possible.

Wear indicators are set to create noise when there is around 2 mm of brake pad friction material thickness remaining. In the case of assessing pad wear through inspection, pads should be replaced at or before 2 mm thickness is reached.

Rotors should be replaced before they reach this minimum thickness and should not be turned below this.

Must I always turn or replace my rotors when changing my pads?
No. If there are no conditions such as pedal pulsation or steering-wheel vibration during braking, and the brake rotor is at least 1 mm thicker than the discard thickness, then it does not need to be turned or replaced.

Do I have to replace my brake rotors after a certain amount of time?
No, but it is a good idea to check the condition of your rotors at every tire rotation.

Why does my brake pedal pulse?
Brake-pedal pulsation and other conditions such as steering-wheel shaking while braking are caused by thickness variation in the brake rotor when a thicker spot of the rotor rotates through the caliper, it pushes back against brake fluid, which can be felt at the brake pedal. The brake fluid and pedal then relax again as the thick spot exits the caliper. This process produces pedal pulsation and “brake torque variation,” which can shake the steering wheel and seats. Brake pulsation is not caused by warping of the disc. However, distortion of the disc due to excessive temperatures or improper installation and torquing of the wheels can lead to brake rotor thickness variation over time. Brake-pedal pulsation is corrected by turning and/or replacing the brake rotors to eliminate the thickness variation.

Why do my brakes squeal? How can I stop it?
Brake squeal is caused by the high-frequency vibration of brake components (rotor, calipers, and/or pads) in response to excitation from the brake friction process. A significant amount of time and engineering goes into eliminating brake squeal from original equipment brake components. Brake components are engineered as a complete system—factory-original performance can only be assured when using original equipment brake pads and rotors. When brake squeal occurs, there may be damage or excessive wear on one or more components affecting noise, including the brake pads, the noise-damping shim that is bonded to the brake pad, or the rotor friction surface.

In addition, it should be recognized that high-performance and track-capable brake systems using high-performance pad materials may be at higher risk for producing brake squeal noise, even when no damage to the components is present.

How long will my brake pads last?
Brake pad life depends on driving habits, vehicle usage, and operating environment. Brake systems are designed to provide 20,000 to 25,000 miles of pad life in very severe use (such as heavy-traffic urban areas) and can give 40,000 to 60,000 miles of pad life in average use. Some factors that will reduce pad life include frequent heavy braking, elevated temperatures (caused by high-speed braking, driving in mountainous areas), driving with the vehicle heavily loaded, and severe environments such as high-corrosion areas and areas with a lot of road debris and dust.

Do metallic brake pads eat rotors?
Yes. Pads with higher metal content will tend to operate with more abrasive friction, where hard metal particles in the pad interact directly with the brake rotor surface. Use of metallic pads will create more brake dust and will shorten the rotor life. Non-asbestos organic pads (also known as ceramic pads) used on most GM vehicles in North America develop a transfer film, a layer of material on the pad and rotor surface that acts as a cushion (at a microscopic scale) between the brake pad and rotor, protecting both from abrasive interaction that causes wear.

My brake pads are very dusty. Are all pads dusty?
Brake dust can occur to some extent on most brake systems, but it is significantly more noticeable with metallic pads and on high-performance brake systems. Brake dust is a mix of debris from the brake rotor, which is the most significant component, and debris from the brake pads. Pad materials that wear the rotor more aggressively will cause more dust.

Are all brake rotors the same?
While brake rotors designed to fit the same vehicle will often be similar in appearance and dimensions, there can be differences in internal cooling vane design, thickness of the brake plates (against which the brake pad rubs), and the grade and material specification of the cast iron. For original equipment brake rotors, significant analysis and testing goes into determining the right geometry to minimize thermal distortion and squeal noise and to maximize cooling. Similar rigor is put into the material selection, which can also affect the risk of squeal noise as well as friction and wear properties.

Search
Contact
Glovebox
Search
Contact Us
Glovebox
Smith Chevrolet Of Turlock 37.51, -120.8818.